Are you using the right antifreeze/summer coolant?
Not if you haven’t matched the right product to the performance demands of your equipment. Heavy-duty cooling systems require special care and year-round protection. Unfortunately, many owners don’t service their cooling systems regularly. Or, if they do, they may believe that any automotive antifreeze or summer coolant will do the job.
But that’s simply not true. While most antifreeze/coolants will prevent freeze-up or boil-over, they don’t perform adequately in heavy-duty machines. They can’t provide the balanced protection a cooling system needs to operate efficiently under extreme pressures and temperatures, and with high volumes of flowing engine coolant.
Why choose John Deere Cool-Gard over other products?
John Deere Cool-Gard is a fully-formulated, heavy-duty antifreeze/summer coolant that’s specifically engineered to match the performance requirements of John Deere equipment. It is the same antifreeze used in new John Deere machines. In fact, our engineers highly recommend it for use in all heavy- and light-duty diesel, natural gas, and gasoline engines, including automobiles.
John Deere’s formulation includes:
– Anti-cavitation additives to prevent cylinder liner cavitation erosion, coolant leakage into the engine oil, and engine failure.
– Alkalinity and buffer additives to prevent acid buildup and acidic corrosion, yielding extended coolant life.
– Unique polymers to guard against scale formation and corrosion, providing longer water pump seal life and reduced internal pump erosion.
– Surfactants to suppress coolant foaming, maximizing the ability of the coolant to transfer heat.
John Deere Cool-Gard is available in two forms – concentrate, which must be mixed with water for proper freeze protection, and pre-mix (ready-to-use), which contains 50 percent demineralized water and has a freeze point of -34 °F. (-37 °C). Both forms have a service life of 5 years/5,000 hours.
LaCORTE EQUIPMENT- GOLD STAR DEALER
LaCorte Equipment is proud to announce coverage in 5 States for our Golf and Turf Division. Clubs in New York, New Jersey, Massachusetts, Rhode Island, and Connecticut already take advantage of John Deere’s premium line of Golf and Turf machines. Our new facility at 522 Edwards Ave. in historic Calverton, New York has been readying themselves for the busy season and our additional facilities in greater New York and Rhode Island have been bustling as well. In three years we have grown from a one acre site with 5600 square feet of building space to 3 acres and 18000 square feet. We achieved this growth with the hard work of our employees, who all care that the customer gets a quality product at a fair price.
Buffalo Turbine, a leader in turbine technology, is celebrating its 80th anniversary in 2025. The…
Curley-Wagner Golf Design is proud to announce its first course signing in the Philippines with…
Bunker performance is only as good as the sand that goes into it. But all…
Audubon International – the environmentally focused non-profit organization offering members numerous certifications and conservation initiatives to…
Augusta National may be the most venerable course in America, Pebble Beach may be the…
Modern Turf recently named Jamey Jackson as regional director of sales. Based in LaGrange, Georgia, Jackson…